The design of the LED panel light is very user-friendly. The light passes through the light guide plate with high light transmittance to form a uniform plane luminous effect. The uniformity of illumination is good, the light is soft, comfortable and bright, which can effectively relieve eye fatigue.
LED panel light general installation location
1. Ceiling
2. Wall
3. Train carriage
4. Counter
The structure of LED panel light
1. The aluminum frame of the panel lamp is the main channel for LED heat dissipation, and the appearance is simple and atmospheric.
2. The LED light guide plate is the key point for the quality control of LED panel lights. If the dot design is not good, the overall light effect seen is very poor. Generally, the light in the middle is dark on both sides, or there is a light band at the light entrance, or there is a partial dark area, or there may be inconsistent brightness at different angles.
3. LED light diffusion plate or sheet using 2.0 acrylic material PC, acrylic and lower cost than the light transmittance of PC, acrylic weak resistance to aging embrittlement, the diffusion plate installed on the network can not be seen later, and the light transmittance It should be around 90%.
4. Reflective paper reflects the remaining light on the back of the light guide plate to improve light efficiency.
5. The main function of the rear cover is to seal the LED panel light, which can play a role in heat dissipation.
6. Drive power, one is to use a constant current power supply, this mode is efficient and cost-effective; the other is to use a constant voltage with constant current power supply, which has stable performance, but low efficiency and high cost.
7. Suspended wire, mounting bracket and other accessories used for installation and fixation.
Features of LED panel light
1. Flexible design
2. High illumination
3. Less fever
4. Long life
5. Variety of light change modes
6. The lamp has strong vibration resistance
7. Strong control ability
8. LED panel light consumes low power
