1. The light source of solar street lights is mostly led products, the surface is tempered glass, and it is also the light-emitting port. We need to pay attention to the cleanliness of the surface. When installing the wiring, the lamp holder will export two wires to facilitate the installer. The wiring method is also different according to the style of the lamp holder. , But the positive and negative poles are the same. When using the tape to wrap it tightly, you should pull it slightly with your hands to prevent it from falling off.
2. The solar panel of the solar street light is a fragile product. Customers cannot put heavy objects on it during installation. When installing the solar panel, we must be aware of the outlets behind the solar panel, which are generally divided into positive and negative poles. The wiring needs to be peeled off. Take the sheathed wire, the multi-stranded copper wire used in solar street lights. When we use it, we need to tighten it so that the wire cannot be exposed. If it is improperly operated, it will short-circuit and burn out the diode.
3. When the solar street lamp battery is fully charged when in use, when we are stripping and installing, we should wrap one tightly first, so that the two positive and negative poles will not touch and ignite due to improper operation. In addition, you need to pay attention to the difference between the positive and negative poles during installation, and you can't connect them wrong.
